搜索
NEWS
NEWS
Position:
Home
-
-
-
Application of air lubricator

Application of air lubricator

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2020-10-28
  • Views:0

(Summary description)The air lubricator is an important part of the pneumatic components. In the pneumatic fluid transmission system, the power is transmitted and controlled by compressed air in the closed circuit. When the air medium needs lubrication, the air lubricator is designed for use. To add the required lubricant to the components in the air stream.

Application of air lubricator

(Summary description)The air lubricator is an important part of the pneumatic components. In the pneumatic fluid transmission system, the power is transmitted and controlled by compressed air in the closed circuit. When the air medium needs lubrication, the air lubricator is designed for use. To add the required lubricant to the components in the air stream.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2020-10-28
  • Views:0
Information

The air lubricator is an important part of the pneumatic components. In the pneumatic fluid transmission system, the power is transmitted and controlled by compressed air in the closed circuit. When the air medium needs lubrication, the air lubricator is designed for use. To add the required lubricant to the components in the air stream.

For modern pneumatic components, lubrication is not necessarily necessary, they can work for a long time without lubricating oil, so the life and characteristics of the components are completely to meet the high frequency needs of modern machinery manufacturing.

Where extremely high-speed movement of the machine parts is required or when the cylinder diameter is large (about 25mm or more), oil mist lubrication should be used, and the air oil mist device should be installed directly on the air supply pipe of the cylinder to reduce the movement of the machine. Parts wear and maintain low friction to avoid rusting of parts. The impurity oil brought in by the compressor when generating compressed air cannot be used as the lubricating oil of the control system components. There are many relative sliding parts inside the pneumatic components, and there are sealing rings between some relative sliding parts, in order to reduce relative movement. The friction between the parts is very important to ensure normal operation, reduce wear to prevent leakage, extend the life of the components, and ensure good lubrication.

Because the air has no self-lubricating property, it must be added with lubricant. The air lubricator is a special oil injection device. The purpose of lubrication.

Scan the QR code to read on your phone

Recommended news

Support Hotline

Address: No. 54 Dalian Road, High-tech Industrial Development Zone, Weihai City, Shandong Province

ZHPC

ZHPC

Website QR Code

Copyright © Weihai Zhonghao Pneumatic Hydraulic Co., Ltd. Powered by www.300.cn   鲁ICP备15004029号   This site supports IPV6 access