搜索
NEWS
NEWS
Position:
Home
-
-
-
The filter manufacturer briefly describes the working process of the Y-type filter for you

The filter manufacturer briefly describes the working process of the Y-type filter for you

  • Categories:Industry news
  • Author:中豪气动
  • Origin:www.whzhonghao.cn
  • Time of issue:2021-04-23
  • Views:0

(Summary description)What is the working process of the Y-type filter? What is its function? Do you know? Today, the filter manufacturer will briefly describe the working process of the Y-type filter for everyone, let's take a look!

The filter manufacturer briefly describes the working process of the Y-type filter for you

(Summary description)What is the working process of the Y-type filter? What is its function? Do you know? Today, the filter manufacturer will briefly describe the working process of the Y-type filter for everyone, let's take a look!

  • Categories:Industry news
  • Author:中豪气动
  • Origin:www.whzhonghao.cn
  • Time of issue:2021-04-23
  • Views:0
Information

What is the working process of the Y-type filter? What is its function? Do you know? Today, the filter manufacturer will briefly describe the working process of the Y-type filter for everyone, let's take a look!

xq

  

The Y-type filter is Y-shaped, one end is for water flow, and the other end is precipitation waste liquid and impurities. It is usually installed at the inlet of a pressure reducing valve, a pressure relief valve, a fixed water level valve or other equipment, and its function is to remove impurities in the water. In order to achieve the purpose of protecting the valve and equipment from working normally, the water to be treated by the filter enters the body through the water inlet, and the impurities are deposited on the stainless steel filter net, thereby generating a pressure difference. The pressure difference switch is used to monitor the pressure difference between the water outlet and the water outlet. When the pressure difference reaches the set value, the electronic controller sends a signal to drive the motor to trigger the following actions: the motor drives the brush to rotate, cleans the filter element, and the control valve opens to proceed. When the water is discharged, the entire cleaning process only takes tens of seconds. When the cleaning is over, the control valve is closed, the motor stops rotating, the system returns to the initial state, and the next step of filtering begins. After the filter device is installed, it is debugged by technicians to set the filter time and cleaning conversion time. The water to be treated enters the body from the entrance, and the filter element starts to operate normally.

   The above is the working process of the Y-type filter introduced by the filter manufacturer, I hope it will help you!

Keyword:

Scan the QR code to read on your phone

Recommended news

Support Hotline

Address: No. 54 Dalian Road, High-tech Industrial Development Zone, Weihai City, Shandong Province

ZHPC

ZHPC

Website QR Code

Copyright © Weihai Zhonghao Pneumatic Hydraulic Co., Ltd. Powered by www.300.cn   鲁ICP备15004029号   This site supports IPV6 access